If you're an office administrator or facilities lead who's been handed the phrase "get us a UPS," this checklist is for you. I'm not talking about a data center buildout with a dedicated power engineer. I'm talking about the situation where you need to spec, quote, and buy 1–5 units—a rackmount UPS for a server closet, an inverter for a solar pilot, maybe a couple of battery chargers—and the decision is on you, not on a procurement department.

That's roughly my job. Office administrator for a 250-person company. I manage facilities and equipment ordering, something like $180,000 a year across a dozen vendors, and I report to both operations and finance. Over the past few years, I've evaluated UPS and inverter manufacturers three separate times. Here's the 7-step process I now run every single time. It fits on one page.

Step 1: Figure out who actually manufactures the unit

This sounds obvious. It isn't. When I first started buying UPS units, I assumed anyone selling me "a 10 kVA inverter" was a manufacturer. Some are. Plenty are trading companies slapping their logo on someone else's chassis. That matters because when something fails at 11 p.m., you want to reach the company that can actually diagnose it.

How to check: ask for the UL file number (UL 1778 is the standard for UPS equipment) or the IEC 62040 certification. Then look up that number on the certification body's public database. If the file number belongs to a different company than the one quoting you, you're being sold through a middle layer. That's not automatically bad—but you should know.

Step 2: Trace the brand lineage and check the service network

Brands change hands. Liebert became part of Emerson Network Power, and that business was later rebranded as Vertiv. That history isn't trivia—it tells you where the parts come from, where the service engineers were trained, and how long the product line has been supported.

What matters more than the brand name, though, is this question: if the unit fails, who physically shows up? Ask for the nearest authorized service location and their stated response time. If the answer is "we have partners nationwide," press once more. A named city and a named SLA is a real answer. A vague one is a warning sign.

Step 3: Get a load calculation in writing, not just a spec sheet

Spec sheets tell you what the unit can do. They don't tell you what your actual load needs. Those are different numbers, and the gap between them is where people buy the wrong size.

Send the vendor a list of your equipment—model numbers, wattage, and whether each item is critical or nice-to-have. Ask them to return a written load calculation with runtime estimates at your target load. If they can't produce that, they're not evaluating your situation; they're quoting a catalog item.

In Q1 2024, we spec'd a rackmount UPS for a server closet. The first quote came back sized for 100% load with zero headroom. The second vendor asked what else we planned to add in the next two years and sized it accordingly. Same price range. Very different outcome.

Step 4: Demand references from buyers your size

This is the step most small buyers skip, because we assume we're too small to ask. That's backwards. Small references are exactly what proves whether a manufacturer treats small accounts well or pawns them off on a reseller.

Ask for two references from customers who ordered similar quantities—ideally within the last 18 months. Then actually call them. Two questions: How was the commissioning? and, when something went wrong, how long did it take to get resolved? Most people will tell you the truth.

When I was starting out, the vendors who treated my $2,000 orders seriously are the same ones I still call for $20,000 orders. Small doesn't mean unimportant. It means potential.

Step 5: Read the warranty exclusions line by line

Skipped this once because I'd done it "a hundred times" and thought, what are the odds the exclusions matter? The odds caught up with me. Battery coverage on the unit I bought ran 12 months. The batteries started failing at month 14. Cost of replacement, out of our budget: about $1,900.

What to check on every UPS or inverter warranty:

  • Battery coverage length (usually shorter than the unit itself—often 1–2 years)
  • Whether "normal wear" includes capacity degradation
  • Whether the warranty is void if you don't use their commissioning service
  • Whether on-site labor is covered or just parts

If the salesperson has to check with engineering to answer these, that's fine. If they deflect, walk.

Step 6: Test the support line before you buy

Here's the step most people miss: call the support number before the sale, during normal business hours, and ask a real pre-sales technical question. Something like "what's the input voltage tolerance for the model you recommended?"

Time how long it takes to reach a human who can answer. This tells you more about what ownership will feel like than any brochure. A manufacturer with strong support will connect you in minutes. A weak one will route you to voicemail—and it won't magically improve after they have your money.

Step 7: Lock down the commissioning plan in writing

Commissioning is the handoff moment. Someone should physically verify the install, test the transfer to battery, and confirm runtime under load. If that doesn't happen, you won't know whether the system works until the day it needs to.

Get three things in the quote document: who performs commissioning, when it happens relative to delivery, and what report you receive afterward. If the answer is "self-install," that's a valid option—but confirm in writing that it doesn't void your warranty.

Common mistakes to avoid

Treating "UPS" and "inverter" as interchangeable. They're not the same product category. A solar inverter manufacturer with 20 years of experience on grid-tied systems may have very little track record on double-conversion UPS units. Ask separately.

Assuming the biggest brand is automatically the safest choice. Heritage brands like the Liebert line that's now under Vertiv carry real weight—but only if the specific model fits your load and the local service coverage is real. A well-supported regional alternative beats an unsupported flagship every time.

Forgetting the disposal plan. Batteries are regulated in most jurisdictions. Ask who handles end-of-life removal and whether the cost is included. As of 2025, that answer varies a lot by region, so get it in writing before the invoice clears—not after.

Bottom line: this isn't a five-year strategic decision. It's a checklist. Run the seven steps, keep the emails, and move on to the next thing on your list.

Pricing and lead times referenced here are for general context only. Verify current figures with the manufacturer or an authorized distributor before ordering, as rates and coverage terms change.

Mateo Alvarez

Mateo Alvarez

Mateo Alvarez is a switchboard and wiring-device analyst covering electrical panels, distribution boards, control panels, switches, industrial plugs, sockets, and outlets. He uses IEC 61439-1 and IEC 61439-2 verification evidence plus IEC 60309 ratings to examine temperature rise, short-circuit withstand, busbar capacity, rated current, creepage, clearance, and enclosure integration. He helps designers and procurement teams match assemblies and connection devices to load diversity, installation access, maintainability, and declared operating conditions.